Dust-tight Enclosed Scraper Conveyor 24h Continuous Operation For Grain Processing Line

EN-MASSE  CONVEYOR

   TGMC series of en-masse conveyor is a kind of continuousconveying device to carry powdery and granular materials horizontally, vertically or at small inclination angle, being notonlwidely used to carry raw grain or feed stuff in grain depot, wharf, grain milling plant, feed processing plant, but to convey matteers in industries such as mining, building material, electricity, chemical,etc.
   TGMC series adopts advanced bushed scrapper chain, UHMW-PE wear resistance lining, simple and reliable anti blocking door, greatly improving the operation performance, prolonging the service life, reducing the noise and the broken rate. TGMC series has the advantages of simple and reasonable structure, small size, good sealing performance.

Key Features & Advantages

1,Materials travel inside an enclosed trouvgh — no spillage, no dust. As environmental regulations tighten worldwide, open belt conveyors with flying dust face fines. TGMC enclosed design ensures compliance from day one.

2,Scraper chain pushes materials at low speed (0.6–0.8 m/s), minimizing impact on fragile grains like rice, corn and soybean. Compared to screw conveyors (crushing) and belt conveyors (throwing), TGMC reduces breakage by 50%+. Less breakage = higher grade = more money per ton.

3,Advanced bushed chain structure features precision sliding surfaces between pin and bushing, reducing wear and elongation. Compared to standard forged chains, bushed chains run smoother, quieter and last longer. The chain is the "heart" of a scraper conveyor — a better heart means worry-free operation.

4,Anti-blocking doors on the trough side allow quick clearing of material blockage — no shutdown, no disassembly, no specialist needed. Any operator can clear a blockage in 5 minutes. Traditional scrapers require half a day to disassemble; TGMC takes 5 minutes.

5,Standard carbon steel offers high cost-effectiveness for grain, cement and ore. Optional stainless steel (304/316) for food-grade (flour, starch, sugar), chemical-grade (corrosive materials) and humid environments (ports, rainy regions). One series, two materials, full coverage.

Process  Parameters